Published 6月 05, 2018 by with 0 comment

CCIE-RS Lab My CCIE Home Lab Equipments & IOS



R1: Cisco 2611 + WIC-2T --- For study CCNP:2002 - 2005
R2: Cisco 2611 + WIC-2T --- For study CCNP:2002 - 2005
R3: Cisco 2611 + WIC-2T --- For study CCNP:2002 - 2005
R4: Cisco 2611 + WIC-2T --- For study CCNP:2002 - 2005
R5: Cisco 2611 + (WIC-1T * 2) --- For study CCNP:2002 - 2005

R6: Cisco 3640 + NM-4A/S + NM-2E2W --- For study CCNP:2002 - 2005
SW1: Cisco 3550-24-SMI --- For study UTS 2008
SW2: Cisco 3550-24-SMI --- For study UTS 2008
SW3: Cisco 3550-24-SMI --- For study UTS 2008
SW4: Cisco 3550-24-SMI --- For study UTS 2008
BB1: Cisco 2514 --- For study CCNA 2000 - 2002
BB2: Cisco 2514 --- For study CCNA 2000 - 2002
BB3: Cisco 2514 --- For study CCNA 2000 - 2002
Frame Relay Switch: Cisco 2610 + [WIC-1T * 2 (Serial0/0-1)] + NM-8A/S(Serial1/0-7) --- For study CCNP:2002 - 2005
Access Server: Cisco 2511 --- For study CCNP:2002 - 2005

R1:
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE SOFTWARE (fc3)

ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)

System image file is "flash:c2600-ik9o3s3-mz.123-15.bin"

cisco 2611 (MPC860) processor (revision 0x00) with 61440K/4096K bytes of memory.

2 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


Initial configurations:
enable
configure terminal
!
hostname R1
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


R2:
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(17a), RELEASE SOFTWARE (fc2)

ROM: System Bootstrap, Version 12.2(6r),  RELEASE SOFTWARE (fc1)

System image file is "flash:c2600-j1s3-mz.123-17a.bin"

cisco 2611 (MPC860) processor (revision 0x00) with 61440K/4096K bytes of memory.

2 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


Initial configurations:
enable
configure terminal
!
hostname R2
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


R3:
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(17a), RELEASE SOFTWARE (fc2)

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

System image file is "flash:c2600-j1s3-mz.123-17a.bin"

cisco 2611 (MPC860) processor (revision 0x300) with 61440K/4096K bytes of memory.

2 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


Initial configurations:
enable
configure terminal
!
hostname R3
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


R4:
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(17a), RELEASE SOFTWARE (fc2)

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

System image file is "flash:c2600-j1s3-mz.123-17a.bin"

cisco 2611 (MPC860) processor (revision 0x203) with 61440K/4096K bytes of memory.

2 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


Initial configurations:
enable
configure terminal
!
hostname R4
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


R5:
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(17a), RELEASE SOFTWARE (fc2)

ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)

System image file is "flash:c2600-j1s3-mz.123-17a.bin"

cisco 2611 (MPC860) processor (revision 0x00) with 61440K/4096K bytes of memory.

2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


Initial configurations:
enable
configure terminal
!
hostname R5
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


R6:
Cisco IOS Software, 3600 Software (C3640-JK9O3S-M), Version 12.4(7), RELEASE SOFTWARE (fc6)

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

System image file is "flash:c3640-jk9o3s-mz.124-7.bin"

Cisco 3640 (R4700) processor (revision 0x00) with 118784K/12288K bytes of memory.

2 Ethernet interfaces
4 Low-speed serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


Initial configurations:
enable
configure terminal
!
hostname R6
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


SW1:
Cisco IOS Software, C3550 Software (C3550-IPSERVICES-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)

ROM: Bootstrap program is C3550 boot loader

System image file is "flash:c3550-ipservices-mz.122-44.SE2.bin"

Cisco WS-C3550-24 (PowerPC) processor (revision K0) with 65526K/8192K bytes of memory.

24 FastEthernet interfaces
2 Gigabit Ethernet interfaces

384K bytes of flash-simulated NVRAM.
Model number: WS-C3550-24-SMI
Configuration register is 0x10F


Initial configurations:
enable
configure terminal
!
hostname SW1
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


SW2:
Cisco IOS Software, C3550 Software (C3550-IPSERVICES-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)

ROM: Bootstrap program is C3550 boot loader

System image file is "flash:c3550-ipservices-mz.122-44.SE2.bin"

Cisco WS-C3550-24 (PowerPC) processor (revision K0) with 65526K/8192K bytes of memory.

24 FastEthernet interfaces
2 Gigabit Ethernet interfaces

384K bytes of flash-simulated NVRAM.
Model number: WS-C3550-24-SMI
Configuration register is 0x10F


Initial configurations:
enable
configure terminal
!
hostname SW2
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


SW3:
Cisco IOS Software, C3550 Software (C3550-IPSERVICES-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)

ROM: Bootstrap program is C3550 boot loader

System image file is "flash:c3550-ipservices-mz.122-44.SE2.bin"

Cisco WS-C3550-24 (PowerPC) processor (revision K0) with 65526K/8192K bytes of memory.

24 FastEthernet interfaces
2 Gigabit Ethernet interfaces

384K bytes of flash-simulated NVRAM.
Model number: WS-C3550-24-SMI
Configuration register is 0x10F


Initial configurations:
enable
configure terminal
!
hostname SW3
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


SW4:
Cisco IOS Software, C3550 Software (C3550-IPSERVICES-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)

ROM: Bootstrap program is C3550 boot loader

System image file is "flash:c3550-ipservices-mz.122-44.SE2.bin"

Cisco WS-C3550-24 (PowerPC) processor (revision K0) with 65526K/8192K bytes of memory.

24 FastEthernet interfaces
2 Gigabit Ethernet interfaces

384K bytes of flash-simulated NVRAM.
Model number: WS-C3550-24-SMI
Configuration register is 0x10F


Initial configurations:
enable
configure terminal
!
hostname SW3
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


BB1:
IOS (tm) 2500 Software (C2500-IS-L), Version 12.2(15)T9,  RELEASE SOFTWARE (fc2)

ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)

System image file is "flash:c2500-is-l.122-15.T9.bin"

cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory.

2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
        
Configuration register is 0x2102


Initial configurations:
enable
configure terminal
!
hostname BB1
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


BB2:
IOS (tm) 2500 Software (C2500-IS-L), Version 12.2(15)T9,  RELEASE SOFTWARE (fc2)

ROM: System Bootstrap, Version 5.2(5), RELEASE SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(5), RELEASE SOFTWARE (fc1)

System image file is "flash:c2500-is-l.122-15.T9.bin"

cisco 2500 (68030) processor (revision C) with 16384K/2048K bytes of memory.

2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102


Initial configurations:
enable
configure terminal
!
hostname BB2
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


BB3:
IOS (tm) 2500 Software (C2500-IS-L), Version 12.2(15)T9,  RELEASE SOFTWARE (fc2)

ROM: System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

System image file is "flash:c2500-is-l.122-15.T9.bin"

cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory.

2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102


Initial configurations:
enable
configure terminal
!
hostname BB3
!
no ip domain-lookup
!
line con 0
 logging synchronous
!
end
wr
!


FRSW:
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(3c), RELEASE SOFTWARE (fc1)

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

System image file is "flash:c2600-ik9o3s3-mz.123-3c.bin"

cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes of memory.

1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
8 Low-speed serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


Initial configurations:
enable
configure terminal
!
hostname FRSW
!
no ip domain-lookup
!
frame-relay switching
!
line con 0
 logging synchronous
!
end
wr
!


Access Server:
IOS (tm) 2500 Software (C2500-IS-L), Version 12.3(18), RELEASE SOFTWARE (fc3)

ROM: System Bootstrap, Version 4.14(9.1), SOFTWARE

System image file is "flash:c2500-is-l.123-18.bin"

cisco 2511 (68030) processor (revision D) with 16384K/2048K bytes of memory.

1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
16 terminal line(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102


Initial configurations:
enable
configure terminal
!
service password-encryption
!
hostname Access_Server
!
enable secret $$$$$
!
aaa new-model
!
aaa authentication login default local
aaa authentication login vty_lines local
!
no ip domain lookup
!
ip host R1 2001 1.1.1.1
ip host R2 2002 1.1.1.1
ip host R3 2003 1.1.1.1
ip host R4 2004 1.1.1.1
ip host R5 2005 1.1.1.1
ip host R6 2006 1.1.1.1
ip host SW1 2007 1.1.1.1
ip host SW2 2008 1.1.1.1
ip host SW3 2009 1.1.1.1
ip host SW4 2010 1.1.1.1
ip host BB1 2011 1.1.1.1
ip host BB2 2012 1.1.1.1
ip host BB3 2013 1.1.1.1
ip host FRSW 2014 1.1.1.1
!
username $$$$$ password $$$$$
!
interface Loopback0
 ip address 1.1.1.1 255.255.255.255
!
interface Ethernet0
 ip address 192.168.100.217 255.255.255.192
 no shutdown
!
ip route 0.0.0.0 0.0.0.0 192.168.100.200
!
banner exec ^C
***************************
Terminal Server
Authorized Personnel Only!
Managed by Peter (M: +61 413 614 814)
***************************^C
!
line con 0
 logging synchronous
line 1 16
 logging synchronous
 no exec
 transport input all
!
line vty 0 4
 logging synchronous
 login authentication vty_lines
!
end


Network Modules:
NM-2E2W:
Cisco 2600: Not supported.
Cisco 3640: Supported.
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800ad3cc.shtml#platsup

NM-4A/S & NM-8A/S
Cisco 2600: Supported.
Cisco 3640: Supported.
http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800a93f1.shtml#topic4


Useful Links:
Cisco Connection Documentation
http://www.cisco.com/univercd/home/home.htm

Cisco IOS Software Releases 12.4 Mainline Configuration Guides - Cisco Systems
http://www.cisco.com/en/US/products/ps6350/products_installation_and_configuration_guides_list.html

Cisco IOS Software Releases 12.4 Mainline Command References - Cisco Systems
http://www.cisco.com/en/US/products/ps6350/prod_command_reference_list.html

Catalyst 3560 Switch Software Configuration Guide, Rel. 12.2(44)SE  [Cisco Catalyst 3560 Series Switches] - Cisco Systems
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/scg.html

Catalyst 3560 Switch Command Reference, Rel. 12.2(44)SE  [Cisco Catalyst 3560 Series Switches] - Cisco Systems
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/command/reference/cr1.html

Catalyst 3550 Multilayer Switch Software Configuration Guide, Rel. 12.2(44)SE  [Cisco Catalyst 3550 Series Switches] - Cisco Systems
http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_44_se/configuration/guide/3550SCG.html

Catalyst 3550 Multilayer Switch Command Reference, Rel. 12.2(44)SE  [Cisco Catalyst 3550 Series Switches] - Cisco Systems
http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_44_se/command/reference/cr.html

Lab Exam Blueprint:
http://www.cisco.com/web/learning/le3/ccie/rs/lab_exam_blueprint.html

ipexpert - TechLinks:
https://www.ipexpert.com/index.cfm/links/category/2


Cabling nightmare







Album:
http://photo.xuite.net/juilin77/2719643


最初發表 / 最後更新: 2008.11.16 / 2018.06.05

0 comments:

張貼留言